Voice Recorder Power Bank
- General Recording/Saving
Do not plug earphones, switch the button to ON position, then start recording. Switching the button to the OFF position allows you to save the recording file and turn off the power. Note: Do not connect to the computer during recording. Otherwise, the file is closed.
- Voice activated recording
Do not plug the earphone, switching the button to ON position, and press and hold the when the red light is bright. When the blue light flashes a few times and release, then the voice-activated recording function is opened. Switching the button to OFF position to save the recording file and turn off the power. I need to use this function, it must be set up each time
- Recording While Charging
Connect the PC or Charger with the USB cable, switch the button to ON position when the red light is flashing or the blue light is keeping bright, press +or”(keep it about 5 seconds). When the red light is off, it will start to record while charging. Switching the button to OFF position to save the recording file and turn off the power.
- Listening While Recording
Do not plug the earphone, switch the button to ON position, press and hold the” +” and “-” at the same time when the red light is bright. When the light is off, release your hand and plug earphones, and it will start listening while recording function. Switching the Dutton to off position to save the recording file and turn off the power.
- Detect Recording Status
During recording, if long press”+” or”-” and the red light is bright, the voice recorder is working. Also, if it is voice-activated recording mode, the light is blue. Time Setting
Change the system time, connect the machine to the computer, and after entering the disk, you can see the file called, Copy this file to your desktop and open the folder. Double click «SET DISK TIME>and check whether PC time is accurate as the figure shows
Click, as shown in the figure, time synchronization is completed. If you want to format the machine, please backup this folder.
Music/Recording Play: Switch the button to on position with earphone connection, wait about 5 seconds then enter music broadcasting. Short press M to switch between music and recording play. Press” +” and “-” to pause (also flash red and blue light), Pressing “+” or “-” lightly, it will exit pause.
Track/Volume Switch: In the play mode, long press the “+” or “- to increase or decrease volume And short press the “+ Or -” to switch the track.
File Deletion: During play mode, press + and” at the same enters pause(flashing red and blue light). Long press “+” or “-“will delete the file you are playing(flashing blue light). Press “+ and at the same time delete all files(flashing red light)
Note: The recording playing state is to delete all recordings files. The music playing state is to delete all music.
Fast Forward/Rewind: Connect the earphone, switch the button to ON position, and press and hold “” release your hand when you hear the voice. At the same time, lon9 press+ will be fast forward, the press will be fast rewind.
(If need this function, it must be set up each time.)
How do you power bank voice activated recorder?
- It cannot record suddenly
Please backup important documents, then format on the computer such as formatting can be used normally. Please clean up the virus on the computer. This situation belongs to the computer virus infection recording pen, resulting in the recording pen cannot use; a long time may cause damage to the machine cannot repair.
- Signal is unresponsive or attached abnormally
Please backup the important file first, and then restore the factory settings. Connect the computer, after finding the drive letter, right- click the mouse, select format, and then select Quick format. this can be completed to restore the factory settings, most of the failures can be ruled out.
- After connecting the computer, no response
First, check whether the plug is inserted in place, if the computer is still no response, and then try to switch to a different computer connection, some computers lack drive cannot identify. If you still cannot recognize it after tryıng, you can contact after-sales upgrade or after-sales. The machine comes with an intelligent reset system, please connect the computer before you save the file is being recorded. As the sound recording and the sound quality is relatively clear parameters of this product, so the recording files relatively large, please timely extracting the files, the company is not responsible for the loss of data.
- When charging or computer connected, switch the button to “OFF position, before using. Please wait until the light is off after you pull it out.
- After finishing Record, regardless of the voice recorder has power or not, you must switch the button to “off position to save the recording file first. Otherwise, the recording file will be lost.
- Please use a power adapter with a charge current of 1A or less for charging, if not, may damage the unit of DANGER (the product is not supplied with a power adapter)
- It is recommended to use the USB interface of the unit to connect the computer.
Do not place this product in a heating device or in a high-temperature environment. Please use the charger with a current of 1A or less to charge the computer. This product uses flash memory to store data, please backup the required data on the computer or other storage devices in time. If the product is damaged or cannot be read/recognized, the company is not responsible for the loss of data.
- Function: ON recorder/ OFF
- Saving time save: 32GB
- Battery capacity: 12 days
- lithium polymer battery Saving time 96H
- Recording format WAV
- Playback format: MP3/WMA/WAV
- Recording Bit: 192KBPS
- Saving time 384H
- Sampling Rate: 48KHZ
- 1x power bank voice recorder
- 1x Charging Cable
- 1x User Manual